Electric tailgate installation manual for Toyota Majesty Granvia 2019+ (GOLD & PINK ECU)
Pls click here to download installation manual
Installation Precautions:
1. For safety and to ensure the normal use of the product, please install it by a professional installer. Do not disassemble the machine without permission to avoid damage to the machine and accident.
2. Before installing the product, start the engine first, check the function display of the car dashboard, the operation of the buttons in the car is normal, and the surface of the car is not scratched. If you have any questions, please report to car owner in time.
3. Check whether the tailgate opens and closed normally, check whether the lights are normal.
4. Turn off the engine and prepare related tools.
5. Installer should first remove the metal objects and other hard objects on their bodies to prevent damage to the car seat or interior during installation.
6. During the installation process, the removed automobile components should be put away to avoid scratching the instrument panel in the car. Debris left in the wiring should be disposed of in time and not left in the car. The joint must be insulated to prevent short circuit.
7. According to our wiring method, avoid affecting the moving parts of the car during the wiring process, such as the steering wheel drive shaft, accelerator and brake pedal and other vehicle control prats. Each wiring harness needs to be fixed after being routed to prevent it from coming loose.
8. Please connect each wiring harness according to our wiring method (Noted the position of the ground wire).
9. Do not insert or remove the connected plug while the power is on, otherwise the host or accessories may be damaged during plugging and unplugging.
10. If the key fob has a tailgate open button, press this button for 3s to open and close the tailgate. If don’t have, you need to press the unlock button 3 times to open and close the tailgate. If you have any problems, please contact our after-sales: info@kaimiao-group.com
Height Setting:
After the product is installed,raise the tailgate to the desired height and press the tailgate switch button for 3-5 seconds. You will hear a sound "BEEP——" and then loose your hand. Press the tailgate switch button again and close it. You will hear 2 rings. Tailgate learning is finished.
Disclaimer:
Due to improper installation and improper use, caused the relevant issues and losses, there is not include within our company's warranty. Thanks for your purchasing our products. Please read the manual carefully before use and collect it for later reference.
Anti-pinch Function:
When the obstacle is directly below the tailgate, it will bounce back in the opposite direction or stop when it hits the obstable.
Fault Phenomenon |
Troubleshooting Method |
The original key fob does not work |
Check if the yellow central control wire is connected. |
Not work after installation |
1. Check if the positive power supply is connected with 12V-16V.
2. Check if the power fuse is inserted.
3. Check if the ground wire is connected. |
Closing the tailgate not in place |
1. Check if the left and right bracket are installed reversed.
2. Check if the control box wire is inserted.
3. Check if the brackets are fixed with our screws.
There are two rubbers on the left and right sides of the original tailgate cover. Check if they are loose and need to tightened. |
The original car key fob does not work |
Is there any learning after installing? You need to press the tailgate switch button to learn. |
The tailgate can only open to half |
1. Check if the left and right bracket are installed reversed.
2. Check if the control box wire is inserted.
3. Check if the brackets are fixed with our screws. |