Control mode of door opening and closing |
(1) Remote control door opening and closing: Press the remote control unlock key 3 times (some models press the trunk key for a long time) to control the trunk.
Note: When pressing the unlock key, press 3 times at a constant speed within 4 seconds. |
(2) The original driver of the trunk picks the key: Control the opening and closing of the trunk.
Note: The control mode is the same as that before installation, and will not take effect until the vehicle is unlocked. |
|
(3) Front key/central control unlock key: Press the front key for about 15s to control the opening and closing of the trunk; If the front key is not installed, press the central control unlock key of the original car 3 times to control the opening and closing of the trunk.
Note: The function of opening the trunk by the front key will only take effect in the state of flameout or P gear, and the function of closing the trunk will take effect at any time. The functions of opening and closing the trunk by the central control unlock key will only take effect under the flameout state. |
|
(4) Trunk rear button: Press to control the trunk to close. | |
Anti-pinch function | In the process of opening and closing the door, if obstructions are encountered, the trunk will immediately stop to avoid accidents. |
Buzzer reminder (During the process of opening and closing the trunk, there are corresponding sound reminders at different stages. When the electric absorption is abnormal, the buzzer will give an alarm |
A. After the electro-suction lock is completed, the beeper will "beep" four times quickly, indicating that the electro-suction is normally locked in place at the secondary level. |
B. After the completion of the electro-suction, the buzzer does not sound, indicating that the electro-suction is normal and the secondary lock is not in place. | |
C. After the electro-suction or spit out, hear a long cry of the buzzer for about 10 seconds, indicating the electro-suction failure (it may be that the electro-suction is stuck or not in good contact). | |
Electro-suction function | In the process of closing the trunk, it has the characteristics of stable speed, low sound and the like, so that the user experience is more comfortable. |
Height setting function | The rear key adjusts the opening height of the trunk: When opening the door, manually adjust the trunk to the ideal height. Press the rear key for a long time and release it after hearing a long sound of the buzzer. The memory of the trunk height is successful. The trunk will open to this position next time. Note: The set height cannot exceed the preset height, otherwise it may cause the door to be unable to open and close normally. |